šŸŽ‰ Up to 70% Off Selected ItemsShop Sale
Product image 1
Product image 2
Product image 3
HomeStore

13mm Machined Aluminum Anodized Fade Barrel by Kuryaka

13mm Machined Aluminum Anodized Fade Barrel by Kuryaka

Ā 

*PLEASE BE SURE TO CHECK BLASTER COMPATIBILITY BEFORE ORDERING*

Silver Version:Ā https://silverfoxindustries.shop/products/13mm-machined-aluminum-barrel-by-kuryaka

Anodized Version:Ā https://silverfoxindustries.shop/products/13mm-machined-aluminum-anodized-barrel-by-kuryaka

Anodized Fade Barrels are now a limited option! Each batch we do from now on will be different from the last!

New Half-n-Half options!Ā Pink-Cyan, and Red-Orange. Instead of the fade being 3/4s of the way down one end, it is right in the middle.

Ā 

Ā 

The pink in the Cyan-Pink Anodized Fade Barrels can look more like a light purple in certain lighting.

Description from Kuryaka himself: "The inner diameter of 13mm (0.510"), is more airtight than the 0.527" barrel used in the Takedown Mag kit and basic Caliburn builds without being as tight as 17/32 brass. It will only work with narrow-headed darts as a result, but results in better efficiency.

Normal tighter inner diameter barrels will not work with Caliburn-style o-ring pushers without modification. These have a 10mm "chamber" at 13.5mm (0.53") ID on one end, which fixes that problem."

These tighter inner diameter barrels have a machined chamber specifically for o-ring type pushers. There are also unchambered versions specifically for the Lynx by Orion Blasters, though they should also work with other blasters that have pushers that do not use o-rings. We have also now commissioned and carry a special 15cm barrel specifically for the Gecko! This barrel has no machined chamber where the dart enters, however it has the last 5cm machined out to keep the effective barrel length at 10cm, which is the most efficient length for the Gecko while allowing the end of the barrel to sit flush with the tip of the blaster. This lets the barrel show when priming, and adds a coolness factor without sacrificing performance.

Chambered Barrels:

10cm Chambered - SPAMF
-
30cmĀ Chambered - Talon Claw / Skewer
-
35cmĀ Chambered - Talon Claw / Caliburn
-
40cmĀ Chambered - Caliburn
-
45cmĀ Chambered - Caliburn
-
50cm Chambered - Caliburn
-
60cm Chambered -Ā Caliburn
-
70cm Chambered -Ā Caliburn

Unchambered Barrels:

22cm Unchambered - SLAB
-
30cm Unchambered - SLAB
-
40cm Unchambered - Lynx
-
45cm Unchambered - Lynx
-
47cm Unchambered - Lynx
-
50cm Unchambered - Lynx
-
60cm Unchambered - Lynx

Specialty Barrels:

15cm (10cm usable) - Gecko

Select Length
From $8.75

Original: $25.00

-65%
13mm Machined Aluminum Anodized Fade Barrel by Kuryaka—

$25.00

$8.75

Product Information

Shipping & Returns

Description

Ā 

*PLEASE BE SURE TO CHECK BLASTER COMPATIBILITY BEFORE ORDERING*

Silver Version:Ā https://silverfoxindustries.shop/products/13mm-machined-aluminum-barrel-by-kuryaka

Anodized Version:Ā https://silverfoxindustries.shop/products/13mm-machined-aluminum-anodized-barrel-by-kuryaka

Anodized Fade Barrels are now a limited option! Each batch we do from now on will be different from the last!

New Half-n-Half options!Ā Pink-Cyan, and Red-Orange. Instead of the fade being 3/4s of the way down one end, it is right in the middle.

Ā 

Ā 

The pink in the Cyan-Pink Anodized Fade Barrels can look more like a light purple in certain lighting.

Description from Kuryaka himself: "The inner diameter of 13mm (0.510"), is more airtight than the 0.527" barrel used in the Takedown Mag kit and basic Caliburn builds without being as tight as 17/32 brass. It will only work with narrow-headed darts as a result, but results in better efficiency.

Normal tighter inner diameter barrels will not work with Caliburn-style o-ring pushers without modification. These have a 10mm "chamber" at 13.5mm (0.53") ID on one end, which fixes that problem."

These tighter inner diameter barrels have a machined chamber specifically for o-ring type pushers. There are also unchambered versions specifically for the Lynx by Orion Blasters, though they should also work with other blasters that have pushers that do not use o-rings. We have also now commissioned and carry a special 15cm barrel specifically for the Gecko! This barrel has no machined chamber where the dart enters, however it has the last 5cm machined out to keep the effective barrel length at 10cm, which is the most efficient length for the Gecko while allowing the end of the barrel to sit flush with the tip of the blaster. This lets the barrel show when priming, and adds a coolness factor without sacrificing performance.

Chambered Barrels:

10cm Chambered - SPAMF
-
30cmĀ Chambered - Talon Claw / Skewer
-
35cmĀ Chambered - Talon Claw / Caliburn
-
40cmĀ Chambered - Caliburn
-
45cmĀ Chambered - Caliburn
-
50cm Chambered - Caliburn
-
60cm Chambered -Ā Caliburn
-
70cm Chambered -Ā Caliburn

Unchambered Barrels:

22cm Unchambered - SLAB
-
30cm Unchambered - SLAB
-
40cm Unchambered - Lynx
-
45cm Unchambered - Lynx
-
47cm Unchambered - Lynx
-
50cm Unchambered - Lynx
-
60cm Unchambered - Lynx

Specialty Barrels:

15cm (10cm usable) - Gecko

You may also like

-65%NEW
Thumbnail 1Thumbnail 2

SF25-TC

$6.00

$2.10

-65%NEW
Thumbnail 1

Captain Slug - Angled Foregrip

$10.00

$3.50

-65%NEW
Thumbnail 1

Carbon Fiber Rod Cover

$20.00

$7.00

-65%NEW
Thumbnail 1

788 Main Spring

$6.00

$2.10

-65%NEW
Thumbnail 1

K26 Main Spring

$4.00

$1.40

NEW
Thumbnail 1

K25 Main Spring

$4.00

NEW
Thumbnail 1

Talon Claw Extended Stock

$8.00

-65%NEW
Thumbnail 1

Aluminum Rod Covers

$24.00

$8.40

-65%NEW
Thumbnail 1Thumbnail 2

Caliburn - Grip Insert

$4.00

$1.40

-65%NEW
Thumbnail 1

Captain Slug - Ayy LMAO Vertical Foregrip

$15.00

$5.25

-65%NEW
Thumbnail 1Thumbnail 2

Caliburn - Stock Spacer

$5.00

$1.75

-65%NEW
Thumbnail 1

ELITE Caliburn - DOOM Shroud

$30.00

$10.50